<button id="kujm1"><acronym id="kujm1"></acronym></button>

<button id="kujm1"><acronym id="kujm1"></acronym></button>
<button id="kujm1"><object id="kujm1"></object></button>

<button id="kujm1"><acronym id="kujm1"></acronym></button>
  • <dd id="kujm1"></dd>
    1. <th id="kujm1"></th>

      <button id="kujm1"><object id="kujm1"></object></button>

      <rp id="kujm1"></rp>
        1. <progress id="kujm1"></progress>

        2. <tbody id="kujm1"></tbody>

          <dd id="kujm1"></dd>
          <rp id="kujm1"><object id="kujm1"></object></rp>

          <th id="kujm1"><track id="kujm1"></track></th>

            <em id="kujm1"><acronym id="kujm1"></acronym></em><rp id="kujm1"></rp>
            1. <rp id="kujm1"><strike id="kujm1"></strike></rp>
              <em id="kujm1"></em>
            2. <th id="kujm1"><pre id="kujm1"></pre></th>
            3. <th id="kujm1"></th><tbody id="kujm1"></tbody>
              <rp id="kujm1"><object id="kujm1"></object></rp>
            4. <em id="kujm1"><acronym id="kujm1"></acronym></em>

              <th id="kujm1"><pre id="kujm1"></pre></th>

              <rp id="kujm1"></rp> <em id="kujm1"><acronym id="kujm1"></acronym></em>
            5. <button id="kujm1"><acronym id="kujm1"></acronym></button>

              <tbody id="kujm1"></tbody>
              <button id="kujm1"></button><button id="kujm1"><acronym id="kujm1"></acronym></button>
              <button id="kujm1"><object id="kujm1"></object></button>
              <em id="kujm1"></em>

              
              
              <em id="kujm1"><acronym id="kujm1"></acronym></em>

            6. <rp id="kujm1"></rp>
            7. <dd id="kujm1"><center id="kujm1"></center></dd>
            8. <th id="kujm1"><pre id="kujm1"><sup id="kujm1"></sup></pre></th>
              <tbody id="kujm1"></tbody>
            9. <button id="kujm1"><object id="kujm1"></object></button><dd id="kujm1"></dd>

            10. <button id="kujm1"></button>
            11. <dd id="kujm1"></dd>
            12. <tbody id="kujm1"><track id="kujm1"></track></tbody>
            13. <progress id="kujm1"><track id="kujm1"></track></progress>

              <ol id="kujm1"></ol>

              <button id="kujm1"><acronym id="kujm1"></acronym></button>

                  <rp id="kujm1"></rp><rp id="kujm1"></rp>
                  <em id="kujm1"></em>

                    <rp id="kujm1"></rp>

                    <th id="kujm1"><track id="kujm1"></track></th>
                  1. <rp id="kujm1"></rp>
                    1. <dd id="kujm1"><optgroup id="kujm1"></optgroup></dd>

                      Product Center 產品中心

                      產品中心

                      當前位置: 首頁 > 產品中心
                       PE36 無溶劑環氧通用底漆
                      來源: 點擊數:794次 更新時間:2019-6-4 9:05:40
                      產品名稱:OMELON PE36
                      產品介紹:
                      GENERAL PE36, is an excellent solvent free epoxy coating for steel
                      總述 PE36 是一種優秀的無溶劑環氧涂料。
                      solvent free FEATRURES Excellent anti-corrosive behaviour Excellent impact resistance
                      產品特性 無溶劑 優異的耐腐蝕性能 優異的抗沖擊性
                      RECOMMENDED USES SHIPS,OFFSHORE & MARINE STRUCTURES. STRUCTURAL STEEL & EQUIPMENT. PIPE COATINGS
                      推薦用途 船舶,近岸和海洋工程 鋼結構和設備 管道涂層
                      SPECIFICATIONDATA Binder Type/Pigment TypeModified epoxy/Amine composite-Anti-corrosive pigments
                      技 術 參 數 基料類型/顏料類型 改性環氧樹脂/復合胺—防腐顏料
                      Colors PE36 10(light grey),PE36 62(red oxide)
                      顏色 PE36 10(淺灰),PE36 62(鐵紅)
                      Finish Glossy
                      表面 高光
                      Mixing ratio 100(base) to 22 (curing agent) by weight
                      混合比率 重量比:100(基料):22(固化劑)
                      Curing agent CAPE36
                      固化劑 CAPE36
                      Specific gravity 1.46 ± 0.04 Kg/dm3
                      比重 1.46 ± 0.04 公斤/立方分米
                      Solid by Volume .. 100 % (theoretical)
                      體積固體份 100%(理論上)
                      Pot Life 1 hour at 23 ºC(73.4℉)
                      混合使用期 1小時/23 ºC(73.4℉)
                      Flash point(Abel) Base: > 61ºC(>140℉); Curing Agent: >33 ºC(>91.4℉)
                      閃點 基料: > 61ºC(>140℉); 固化劑: >33 ºC(>91.4℉)
                      Theoretical covering capability 8 Sq.m/Lt. at 125 microns (5 mils) DFT.
                      理論覆蓋能力 8平方米/升(125μm).
                      Typical film thickness per coat Wet: 125 microns (5 mils); - Dry: 125 microns (5 mils).
                      單層膜厚 濕膜:125um; 干膜:125um
                      Application method Brush,Roller,Airless Spray
                      施工方法 刷涂,輥涂,無氣噴涂
                      Thinner TH03
                      稀釋劑. TH03
                      Drying time Surface dry: 4 hours at 23°C (73.4°F)
                      干燥時間 表干: 4小時/23°C (73.4°F)
                      Overcoating time Min:16 hours at 23ºC (73,4ºF). Max: 7 days at 23ºC (73,4ºF)
                      涂裝時間 最短:16小時/23ºC (73,4ºF)。 最長:7天/ 23ºC (73,4ºF)
                      Recommended primers Self primer
                      推薦底漆 自身
                      Ambient temperature Min: 0 ºC (32°F)-Max:40 ºC (104°F)
                      環境溫度 最低:0 ºC (32°F)最高:40 ºC (104°F)
                      Substrate temperature Should be 4ºC (7ºF) above the Dew Point.
                      底材溫度 高于露點以上4ºC (7ºF)
                      Packing Product is a two pack component, available in 5and 20L combined packs
                      包裝 雙組分,有5,20升組合包裝
                      Storage and Shelf life The product must be stored in accordance with national regulations. The product should be kept in a cool well ventilated places protected from high temperatures Containers MUST BE kept tightly closed. Shelf life: 1 year
                      儲存及有效期 產品儲存必須遵守國家規章。應保存于陰涼、通風良好的地方,避免過高的溫度。容器必須牢固密封.儲存期:1年
                      SURFACE PREPARATION PE36, is tolerant to abrasive blasted or mechanicallytreated surfaces,accordingly to the following table stangards: Abrasive Blasting:SA2(ISO8501-1:1988) Mechanical Treated:St3(ISO8501-1:1988)
                      表面處理 PE36應用時表面處理可采用噴砂、機械處理,標準如下
                       噴砂:  機械處理:
                       SA2 (ISO 8501-1:1998)  St3(ISO 8501-1:1988)
                         
                      MIXING AND THINNING PE36,is a two pack product,which contains the proper ratio of ingredients.The entire contents of each container must be mixed together,as supplied.Stir base first to obtain smooth homogenous condition not longer then 2 minutes.The use of a speed adjustable power mixer is recommended.Do not over agitate as this,will accelerate cure ang reduce pot-life of product. If necessary due to equipment limitations, thinning is allowed with TH03(max:5%v/v) Higher temperatures will reduce pot life of the mixture .Lower temperatures will inerease it
                      PE36,是雙組分產品,有正確的成分配比。需要把每桶涂料全部混合在一起后使用。先把基料攪拌至均勻光滑狀態,時間不該超過2分鐘,再緩慢加入固化劑并攪拌3分鐘。建議使用可調速動力攪拌器。不要過分攪拌,否則會加速固化和縮短產品的壽命。高溫將縮短混合物的活性期。低溫可延長。一般不要稀釋,如果需要的話可以加入少量的稀釋劑(5%或更少),這取決于當地的對揮發性有機化合物和空氣質量的規定;旌虾拖♂
                      APPLICATIONPE36, can be applied by airless,brush or roller.When working in confined spaces,good ventilation should be provided. Avoid applying over a moving water film,water poodles or under direct rain impact.When airless equipment is used,a 80:1(or larger) pump is recommended. Using a 0.021 to 0.026 tip size and an outlet pressure of 300 bar a good spray pattern will be obtained.The recommended spray angle is 40°/70°.
                      施工 PE36 可使用無氣噴涂、刷涂和輥涂。在狹小空間施工時,必須要有很好的通風。避免在有明水和雨淋時施工。當使用無氣噴涂時,建議使用80:1(或更大)比例的泵。為取得良好的噴涂效果,需要使用0.021到0.026英寸的噴嘴,輸出壓力300巴噴涂角40°到70°,
                      SAFETY WARING: Cause eye and skin irritation. The solvents may cause respiratory irritatio in sensitive individuals. May cause allergic skin reaction. Avoid breating the solvents. Do not get in eyes on skin or clothing. ear eye and skin protective equipment. Use appropriate respirator, it is recommended to avoid potential respiratory irritation. Wash skin thoroughly after use and water. Call a physician. Launder clothing before reuse. If not breathing give artificial respiration, preferably mouth-to-mouth, and call physician. FIRST AID: In case of eye contact immediately flush with pelenty of water for at least 15 minutes while removing contaminated clothing and shoes.Wash skin contact area with soap.
                      安全措施 警告:對眼睛和皮膚有刺激,蒸汽對敏感的人來說 可能引起呼吸道過敏?赡芤鹌つw過敏反應。 避免吸入蒸汽。不要接觸到眼睛或皮膚。耳、眼、 皮膚要有防護裝備。為了避免潛在的呼吸道刺激, 建議使用合適的呼吸器。使用后要徹底清洗皮膚。 衣服應洗滌后穿著。如果沒有呼吸,嘴對嘴進行 人工呼吸,并迅速就醫。 急救:如果不慎接觸了眼睛,立即用清水沖洗至少 15分鐘,并脫去污染的衣鞋,用肥皂清洗接觸后的皮膚。
                      DISCLAMER This is not a specification and all information is given in good faith. Every values presented as Theoretical were calculated from the product formula If requested, can inform any internal measurement method used to determinate any given value presented. Since conditions of use are beyond the manufacturers control information contained herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use contemplated is the sole responsibility of user. The product is intended for professional use only. In case of any doubt, contact your local  agent.
                      提請注意 此文件不是正式的技術文件,所列出的信息是可靠的。 提供的的每個數值都是作為理論數據從產品的配方中 計算出來的。如果需要,可以告知任何上述 給出數據的內部常用測量確定方法。由于使用條件非 生產商所能控制,這里的信息不做為擔保。產品只是 用于專業使用。如有任何問題,請與當地 代理商聯系。
                      【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
                      上一篇:PE07 環氧云鐵防銹漆 下一篇:PE27 濕固化環氧云鐵防銹漆