Specification Data             

技術參數

Binrder Type/Pigment Type              Epoxy,polyamide/Zinc powder

基料類型/顏料類型                             環氧樹脂,聚酰胺/鋅粉      

Colors                                                  Grey

顏色                                                      灰色

Finish                                                   Matte

表面                                                       啞光

Mixing ratio                                          16 (base)  to  1  (curing agent)  by weight.

混合比                                                   4  (base)  to  1  (curing agent)  by volume

重量比 16（基料） ：     1（固化劑）

體積比 4(基料)     ：     1（固化劑）

CURIng agent                                      CA04

固化劑                                                    CA04

Specific gravity(mixture)                     3.00±0.04Kg/Lt

比重                                                        3.00±0.04公斤/升

Solids by Volume                                54%(theoretical).

體積固體份                                            54% （理論值）

Pot Life                                                  4hours at 23⁰C(73.4⁰F)

混合使用期                                            4小時 (23度)  

Flash point(Abel)                                 Base:>34⁰C(>93⁰F);           Curing Agent:>34⁰C(>93⁰F)

閃點                                                        基料：>34度 ；         固化劑：>34度

Theoretical covering capacity           10.8Sq.m/Lt(440Sq.ft/US gal.)at 50 microns DFT(2 mils)

理論覆蓋率                                            10.8平方米/升Lt，    50um干膜厚度

Typical film thickness per coat        Wet:microns93(3.7mils);-Dry:50microns DFT(2 mils)

單層膜厚：                                           濕膜：93um  干膜： 50um

Thinner                                                 Material:EURO-thinner TH03;    Cleaing:EURO-thinner TH03

稀釋劑                                                   材料:TH03，   清潔劑：TH03

VOC                                                      300 grams/Lt

揮發性有機化合物                              300克/升

Drying time                                         Surface dry:30minutes at23⁰C(73.4⁰F)and 50% relative humidity

干燥時間                                              表干: 30分鐘。在23度和50%相對濕度下

Overcoating time                                Min:16hours at 23⁰(73.4⁰)

重涂時間                                             最短: 16小時;     在23度時

Ambient temperature                       Min:5⁰C(41⁰F)-Max:40⁰C(104⁰F).Avoid applications with relative

環境溫度                                             humidity higher than 85%.In case of any doubt,contact your

                                                            local Euronavyagent.

最低： 5℃，最高溫度40℃。避免

相對濕度大于85%條件下施工。

Substrate temperature                   Min:4⁰C(7⁰F) above the Dew Point.

底材溫度                                            高于露點溫度4℃(7⁰F)

Storage and Shelf life                    The product should be kept in a cool well ventilated

儲存和有效期                                   places protected from high temperatures. Container MUST BE

                                                          kept tightly closed. Shelf life:1 year