<button id="kujm1"><acronym id="kujm1"></acronym></button>

<button id="kujm1"><acronym id="kujm1"></acronym></button>
<button id="kujm1"><object id="kujm1"></object></button>

<button id="kujm1"><acronym id="kujm1"></acronym></button>
  • <dd id="kujm1"></dd>
    1. <th id="kujm1"></th>

      <button id="kujm1"><object id="kujm1"></object></button>

      <rp id="kujm1"></rp>
        1. <progress id="kujm1"></progress>

        2. <tbody id="kujm1"></tbody>

          <dd id="kujm1"></dd>
          <rp id="kujm1"><object id="kujm1"></object></rp>

          <th id="kujm1"><track id="kujm1"></track></th>

            <em id="kujm1"><acronym id="kujm1"></acronym></em><rp id="kujm1"></rp>
            1. <rp id="kujm1"><strike id="kujm1"></strike></rp>
              <em id="kujm1"></em>
            2. <th id="kujm1"><pre id="kujm1"></pre></th>
            3. <th id="kujm1"></th><tbody id="kujm1"></tbody>
              <rp id="kujm1"><object id="kujm1"></object></rp>
            4. <em id="kujm1"><acronym id="kujm1"></acronym></em>

              <th id="kujm1"><pre id="kujm1"></pre></th>

              <rp id="kujm1"></rp> <em id="kujm1"><acronym id="kujm1"></acronym></em>
            5. <button id="kujm1"><acronym id="kujm1"></acronym></button>

              <tbody id="kujm1"></tbody>
              <button id="kujm1"></button><button id="kujm1"><acronym id="kujm1"></acronym></button>
              <button id="kujm1"><object id="kujm1"></object></button>
              <em id="kujm1"></em>

              
              
              <em id="kujm1"><acronym id="kujm1"></acronym></em>

            6. <rp id="kujm1"></rp>
            7. <dd id="kujm1"><center id="kujm1"></center></dd>
            8. <th id="kujm1"><pre id="kujm1"><sup id="kujm1"></sup></pre></th>
              <tbody id="kujm1"></tbody>
            9. <button id="kujm1"><object id="kujm1"></object></button><dd id="kujm1"></dd>

            10. <button id="kujm1"></button>
            11. <dd id="kujm1"></dd>
            12. <tbody id="kujm1"><track id="kujm1"></track></tbody>
            13. <progress id="kujm1"><track id="kujm1"></track></progress>

              <ol id="kujm1"></ol>

              <button id="kujm1"><acronym id="kujm1"></acronym></button>

                  <rp id="kujm1"></rp><rp id="kujm1"></rp>
                  <em id="kujm1"></em>

                    <rp id="kujm1"></rp>

                    <th id="kujm1"><track id="kujm1"></track></th>
                  1. <rp id="kujm1"></rp>
                    1. <dd id="kujm1"><optgroup id="kujm1"></optgroup></dd>

                      Product Center 產品中心

                      產品中心

                      當前位置: 首頁 > 產品中心
                       ES326 無溶劑型水下環氧填充劑
                      來源: 點擊數:907次 更新時間:2019-6-4 9:15:30
                      產品名稱:OMELON ES326
                      產品介紹:
                      GENERAL EURO-paste ES326, is an excellent 100% solids two components epoxy filler for application underwater with conventional tools. EURO-paste ES326, is ecologically formulated and designed to be applied on steel , where high impact resistance and thickness are required, such as pitting, welding and anodic zinc areas. EURO-paste ES326 , Can be applied directly over poorly treated surfaces.
                      總述 ES326是優異的固含量為100%的雙組份環氧填充劑?刹捎贸S霉ぞ咴谒率┕。 ES326 可以涂覆在要求沖擊強度高,厚膜的鋼鐵,纖維玻璃的表面,如有小孔、焊縫和陽極鋅的部位。 ES326 可以直接涂覆在表面處理質量較差的表面。
                      FEATRURES

                       NO HARMFUL SOLVENT VAPOURS
                      Superior impact resistance Good chemical resistance
                      Cost savings on surface preparation
                      Excellent anticorrosive properties 
                      High film build ?up to 5000 microns(200 mils) 
                      Easy underwater application with conventional tools 
                      Compatible with Cathodic protection

                      性能

                      無有害溶劑揮發
                      抗沖擊強度高
                      耐化學性好
                      節省表面處理成本
                      優異的抗腐蝕性 膜厚可達5000微米
                      采用常用工具易于水下涂裝
                      與陰極保護有相容性

                      RECOMMENDED USES SHIPS , OFFSHORE & MARINE STRUCTURES STRUCTURAL STEEL & EQUIPMENT PIPE & GREY WATER TANKS STEEL WATER TANKS,ETC.
                      應用 造船,港口,海洋工程 鋼結構和設備 管線和儲罐 鋼制水罐等
                      Specification Data
                      技術參數
                      Binder Type/Pigment Type Modified epoxy ?Chemical resistant pigments and extenders
                      基料類型/顏料類型 改性環氧樹脂-耐化學性顏料及填料
                      Colors White
                      顏色 白色
                      Finish Semi-Gloss
                      表面 半光
                      Mixing ratio 5 (base) to 1 (curing agent) by weight
                      4.4(base) to 1 (curing agent) by volume
                      混合比率 重量比 5(基料):1(固化劑)
                      體積比 4.4(基料):1(固化劑)
                      curing agent 326C01
                      固化劑 326C01
                      Specific gravity 1.25?.04Kg/Lt
                      比重 1.25?.04公斤/升
                      Solids by Volume 100% (Theoretical)
                      體積固體份 100%(理論值)
                      pot life 30 minutes at 23℃(73,4℉) , (outside from the water)
                      混合使用期 30分鐘(23癈)
                      Flash Point(Abel) Base:>100℃(>212℉);Curing Agent>100℃(>212℉)
                      閃點 基料:>100℃; 固化劑: >100℃
                      Thinner Material: Not applicable ?Cleaning: EURO-thinner TH03
                      稀釋劑 材料:無; 清洗:TH03
                      V.O.C Does not contain. It is a 100% solids epoxy product.
                      揮發性有機化合物 不含VOC,100%固含量環氧產品。
                      Drying time Surface dry:approx. 24 hours (underwater application , 23℃ aprox.)
                      干燥時間 表干:24小時在23癈水下
                      Overcoating time Min:24 hours at 23℃(73.4℉)-Max:7days
                      重涂時間 最短:24小時在23癈時,最大:7天
                      Ambient temperature Min: 5℃(41℉),Max:50℃(122℉)
                      環境溫度 最低: 5℃,最高溫度50℃
                      Substrate temperature Min:5℃(41℉),Max:50℃(122℉)
                      底材溫度 最低: 5℃,最高溫度50℃
                      Storage and Shelf life The product should be kept in a cool well ventilated places protected from high temperatures. Container MUST BE kept tightly closed. Shelf life:1 year
                      儲存及有效期 產品保存于陰涼、通風良好的地方,避免溫度過高。容器必須牢固密封。 有效期:1年
                      Application guide
                      施工指
                      SURFACE PREPARATION EURO-paste ES326, is engineered for direct application on poorly prepared surfaces. Gently clean surface with pneumatic rotating machine over area to be treated. Remove all lose material, fouling , grease and lose coating. Before application of EURO-paste ES326, you MUST gently clean surfae if and fouling or debris has settled on surface with rotating disc of SCOTCH BRITE or similar materials.surface. Contact your local Euronavy agent, for recommendations.
                      表面處理 ES326, 直接用于低處理表面上涂裝。輕輕地用氣動的旋轉機器處理表面。去除所有的浮土、污垢、油污和松動涂層。涂覆本涂料之前,您必須用SCOTCH-BRITE的旋轉盤或相似的工具,清除表面上的污垢或有機殘渣。注意,如果表面有油脂污染,涂層會起珠,而沒有附著力,可采用肥皂或洗滌劑清潔表面。
                      APPLICATION EURO-paste ES326, can be applied by roller..Care should be taken that proper and uniform film thickness are obtained.
                      施工 ES326,可以采用刮刀涂覆,注意應得到適當均勻的膜厚
                      SAFETY WARNING: Avoid breathing vapors. Do not get in eyes, on skin or clothing. Use ear, eye and skin protective equipment. Use appropriate respirator . Wash skin thoroughly after use and water. Launder clothing before reuse. If not breathing gives artificial respiration, preferably mouth-to-mouth, and call physician. FIRST AID:In case of eye contact immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash skin contact area with soap
                      安全措施 警告:避免吸入汽霧。請勿觸及眼睛、皮膚。要使用眼、耳、皮膚的防護用具,使用合適的面具。使用后用清水徹底的清洗皮膚。衣物再次使用前要洗滌。如果沒有呼吸要進行人工呼吸,最好嘴對嘴,并迅速就醫。 急救:如果不慎接觸了眼睛,立即用清水沖洗至少15分鐘,并脫去污染的衣鞋,用肥皂清洗接觸后的皮膚
                      DISCLAMER This is not a specification and all information is given in good faith. Every values presented as Theoretical were calculated from the product formula If requested, Euronavy can inform any internal measurement method used to determinate any given value presented. Since conditions of use are beyond the manufacturers control information contained herein is without warranty. The product is intended for professional use only. In case of any doubt, contact your local Euronavy agent.
                      提醒注意 此文件不是正式的技術文件,所列出的信息是可靠的。提供的每個數值都是作為理論數據從產品的配方中計算出來的。如果需要,Euronavy可以告知任何上述給出數據的內部常用測量確定方法。由于使用條件非生產商所能控制,這里的信息不作為擔保。產品僅限于專業人員使用。如有任何問題,請與當地EURONAVY相關機構聯系。
                      【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
                      上一篇:ES323 無溶劑型水下環氧涂料 下一篇:AA01 醇酸面漆