• <th id="twcrf"></th>
    
  • <progress id="twcrf"></progress>
      <tbody id="twcrf"><p id="twcrf"></p></tbody>

        <rp id="twcrf"><object id="twcrf"><blockquote id="twcrf"></blockquote></object></rp>

          Product Center 產品中心

          產品中心

          當前位置: 首頁 > 產品中心
           AT12 耐高溫硅基涂料
          來源: 點擊數:669次 更新時間:2019-6-4 9:13:40

          產品名稱:OMELON AT12
          產品介紹: 

          SPECIFICATION  DATA

          技 術 參 數

          Binder Type/Pigment Type             Silicon pigmented with aluminum

          基料類型/顏料類型                            硅基樹脂/鋁粉顏料

          Colors                                                 Aluminium

          顏色                                                     鋁色                                                                                                          

          Finish                                                 Semi-gloss

          表面                                                     半光

          Specific gravity                                  1.07:0.03Kg/ Lt

          比重                                                     1.07:03公斤/升

          Solid by Volume                                28%(theoretical)

          體積固體份                                         28%(理論值)

          Flash point(Abel)                               >25℃

          閃點                                                 >25℃

          Theoretical covering capability       11.2Sq.m/Lt.(457 q.ft/US gal.) at 25 microns DFT(1mils) DFT

          理論覆蓋能力                                      11.2平方米/升, 25μm干膜厚度

          Typical film thickness per coat        Wet:89 micro(3.6mils); Dry:25 microns (1mils)

          單層膜厚                                               濕膜:89μm;干膜:25μm                                                                           

          Thinner                                                  Material: not required -Cleaning: EURO-thinner TH02

          稀釋劑                                                    材料:不要求,清洗劑:TH02

          VOC                                                        >340grams/Lt

          揮發性有機化合物                                    >340克/升

          Drying time                                           Surface dry: 1 hour (at 23℃ and 50% relative hunidity)

          干燥時間                                               表干:1小時,23℃(73.4℉)50%的相對濕度

          Overcoating time                                 Min:16 hours at 23℃ ;Max: Not critical

          重涂時間                                             最短:16小時,23癈; 最長:無臨界值

          Recommended primers                            Self

          推薦底漆                                                產品本身

          Ambient temperature                         Min:10℃- Max :50℃. Relative humidity : over 85% should be

          環境溫度                                              avoided

                                                                         最低:10度,最高:50度,相對濕度不大于85%

          Substrate temperature                            4℃ above the Dew Point

          底材溫度                                               高于露點以上4℃,

          Storage and Shelf life              

          儲存及有效期                                        The product should bekept in a cool well ventilated places protected from high temperatures. Container MUST BE kept tightly closed. Shelf life:1 year.

                                                                          產品保存于陰涼、通風良好的地方,避免過高的溫度。容器必須牢固密封。  產品有效期:1年。
           

          【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
          上一篇:AC01 氯化橡膠面漆 下一篇:沒有了